3 ton worm gear hydraulic winch / pulling winch / truck winch/ towing winch / wrecker winch
|Used As||Pulling Winch, Recovery Winch||Applied For||Recovery Vehicles, Truck, Loader, Wrecker, Tractors, Etc.|
|Pull Force||1-40 Ton / 10-400KN||Contact||Cathy|
We are the manufacturer of self-recovery winch, hydrauic winch, pulling winch, truck winch, towing winch, wrecker winch, recovery hydraulic winch, Hydraulic Truck Winch For Wagon Tugger Garbage Truck Winch with compacted design. multidisc type friction brake with more than 10 years experience in designing and manufacturing different types of hydraulic winches for widely application.
3 ton pulling hydraulic winch
|Pull force (Inner layer)||KN||29.4|
|Rated Pull force||Layer||1||2||3||4|
|Rope speed (Inner layer)||m/min||5.5|
|Working flow rate||L/min||45|
|Layer number||3 or 4|
|Net weight (without motor)||kg||40kg|
Lubrication oil: N460 industrial gear oil Oil volume: 300mL~350mL
This kind of winch is for intermediate working condition.
It is used for pulling rather than hoisting.
We are the group company in China, the registered capacity is 6,000,000 and the factory area is about 6000sqm. Staffed with 150 employees, including 10 engineers.
HCW series Hydraulic Compact Truck Winch For Wagon Tugger Winch which mainly consists planetary decelerator, hydraulic motor, brake, drum, etc. the winch makes the operation more stable and the structure more reasonable, its use multidisc type friction brake makes the brake torque large, safe and reliable.
For the winch in the picture, it is out HCW series recovery hydraulic winch.
1. Full-float typed planetary gear reducer makes the operation more stable, the structure more reasonable.
2. Adopt multidisc-typed friction normally-closed arrester makes the brake torque larger, safer and more reliable.
3. The product is featured by its small size, compact construction and high transmission efficiency.
4. Free wire releasing function.
5. Adopt motor with long use life.
6. The installation bracket can be manufactured according to the customer's requirement.
7. According to the requirement of customers, manufacture the balance valve and shuffle valve special for this winch.
8. Adopt manual, pneumatic clutch equipment.
9. Manufacture according to GJB82-86 National Military Hydraulic Winch Standard.
Specification of winch
|Model||The 1st Layer||Flowing Of System(L/min)||Working Pressure Diff.(Mpa)||Diameter (mm)||Capacity Of Rope (m)||Hydraulic Motor||Ratio|
|Pull Force (KN)||Rope Speed (m/min)|
Tel: 0086-134 8664 5746